Bell South

If you have Bell South's "N.T.S. Enternet300" software (PPPoE) installed on your computer/s you need to uninstall it. Click on your "Start" button, go up to "Settings" and then over to "Control Panels". Go to "Add/Remove Programs" and double click, find "Enternet300" and remove it.

Next, go to http://192.168.1.1 in your web browser. Leave username blank, enter "admin" for the password. (by default) Once in the set-up page, go down to "PPPoE" at the bottom of the page. Click "Enable" and enter your Bell South Username and Password into the appropriate slots. Click on the "Apply" button and you are ready to go! You can check if you're connected and verify the assigned Bellsouth IP address on the status page.


	Setup	Password	Status	DHCP	Log	Security	Help		Advanced

SETUP

This screen contains all of the router's basic setup functions. Most users will be able to use the router's default settings without making any changes. If you require help during configuration, please see the user guide.

(Required by some ISPs) – Username or Machine name

Domain Name:

(Required by some ISPs) – Not required by bellsouth

Firmware Version:

1.40.2, Oct 23 2001

LAN IP Address:

(MAC Address: 00-94-9A-EC-65-A9)

. . . (Device IP Address)

(Subnet Mask)

WAN IP Address:

(MAC Address: 00-94-9A-EC-65-AA)

Obtain an IP Address Automatically

Specify an IP Address	. . .
Subnet Mask:	. . .
Default Gateway Address:	. . .
DNS(Required) 1:	. . .
2:	. . .
3:	. . .

Login:

PPPoE RAS Disable
NOTE: PPPoE is for ADSL user only.(Bellsouth)
RAS is for SingTel ADSL user only.

User Name: ( @bellsouth.net for BBG customers)

Password:

RAS Plan:

Connect on Demand: Max Idle Time Min.
Keep Alive: Redial Period Sec.