Free Web Hosting by Netfirms
 Web Hosting by Netfirms | Free Domain Names by Netfirms

Bell South Single Static IP customer setup for Linksys Cable\DSL gateway           Home

If you have Bell South's "Enternet300" software (PPPoE) installed on your computer/s you need to uninstall it. Click on your "Start" button, go up to "Settings" and then over to "Control Panels". Go to "Add/Remove Programs" and double click, find "Enternet300" and remove it.

Next, go to http://192.168.1.1 in your web browser. Leave username blank, enter "admin" for the password. (by default) Once in the set-up page, go down to "PPPoE" at the bottom of the page. Click "Enable" and enter your Bell South Username and Password into the appropriate slots. Click on the "Apply" button and you are ready to go! You can check if you're connected and verify the assigned Bellsouth IP address on the status page. Follow the link on the top of the screenshot below or click here to view.

These are the unsupported setup steps to allow the Linksys gateway to obtain the 1 single static assigned Bellsouth IP address into the gateway. It is up to the customer to configure the advanced settings for the IP address to be assigned, filtered, or forwarded to 1 computer on the LAN so that the IP address can be publicly available.

 
 

 

 

Setup

Password

Status

DHCP

Log

Security

Help

 

Advanced

 

 

SETUP

This screen contains all of the router's basic setup functions. Most users will be able to use the router's default settings without making any changes. If you require help during configuration, please see the user guide.

 

Host Name:  

   (Required by some ISPs) – Username or Machine name

Domain Name:  

   (Required by some ISPs) – Not required by bellsouth

      Firmware Version:  

   1.40.2, Oct 23 2001

LAN IP Address:  

   (MAC Address: 00-94-9A-EC-65-A9)

 

    . . . (Device IP Address)

 

    (Subnet Mask)

WAN IP Address:  

   (MAC Address: 00-94-9A-EC-65-AA)

 

    Obtain an IP Address Automatically

 

   Specify an IP Address

. . .

Subnet Mask:

. . .

Default Gateway Address:

. . .

DNS(Required)                  1:

. . .

2:

. . .

3:

. . .

 

Login:  
 
 

    PPPoE RAS Disable
      NOTE: PPPoE is for ADSL user only.
                RAS is for SingTel ADSL user only.

Rounded Rectangular Callout: This is where our active Bellsouth Static login Username and Password are entered..  

     User Name:   (No Business Customers are BBG.)

 

     Password:    

 

     RAS Plan:    

 

    Connect on Demand: Max Idle Time Min.
    Keep Alive: Redial Period Sec.