Bellsouth FastAccess DSL
DSL Solutions
Supported and Unsupported
Advice Site
Troubleshooting the Alcatel Speed Touch Home Modem
Configure TCP/IP Windows 2000 Ethernet cards using a static IP
assignment
Access the Network
Properties inside the control panel
Then right click on the
Local Area Connection (LAN) Icon and go to its properties which shows the
NIC or Ethernet card settings. There should only be two of these, as we
only support 1 NIC in a computer. The second icon represents the NTS PPPoE
Adapter which is created after an Enternet 300 installation and is necessary
for connectivity to DSL.
Then go to the TCP/IP
Properties Window and configure it with the static IP assignment.
Be sure you click the "OK" button on the bottom of both open network
windows.
You must restart your computer after making and
saving these changes to your network properties. to take effect.
If
everything is OK so far.....next you will need try the ping test to the
newly assigned gateway IP address 10.0.0.138
Go here for more instructions on how to ping.
We the staff at DSL Solutions are working
diligently day and night on getting the latest information to you, our
valued customer and friend. Within the next few weeks we will be adding more
information to our site so you will have all the information needed right at
your finger tips. Our service is free and we would like to keep it that way
and by you donating just $1 a month that will help to keep the research
going so we can continue to provide you with all this great information.
Send mail to
fastaccess@attbi.com with
questions or comments about this web site.
Last modified:
09/15/02
Bellsouth FastAccess DSL
